TECHNICL DETAILS

ASSEMBLING THE DEVICE

Assemble the device as follows:

  • Remove the complete frame, the 4 fixing clips and the protective screen from the packaging
  • Remove the protective film from both sides of the screen
  • Apply the protective screen to the frame
  • Attach the 4 fixing clips

For the various procedures, follow the images shown in the instructions.

The protective screen is a PET sheet. The protective screen is a replacement part and can be purchased separately using item code Z3565-2. No other replacement parts are available for purchase separately nor are there accessories that can be used with Givi S302. Givi recommends using original replacement parts. Givi is not liable for the use of parts that are not original nor provided.

REPLACING THE PROTECTIVE SCREEN

The Givi S302 protective screen can be replaced as follows:

  • Remove the 4 fixing clips from the frame
  • Remove the old protective screen
  • Take a new protective screen from the packaging
  • Remove the protective film from both sides of the screen
  • Apply the protective screen to the frame
  • Attach the 4 fixing clips

For the various procedures, follow the images shown in the instructions.

WEARING THE DEVICE

Rotate the internal revolving headband upwards by around 90°, loosen the rear elastic and fit the screen by holding the elastic at the nape of the neck, rotate the device forward until the fixed headband touches the forehead and the revolving headband touches the top of the head.
Rotate the revolving headband backwards towards the nape of the neck until the device is properly secured on the head.
Once the device is fitted, the screen can be raised and lowered but the device should be used with the screen completely lowered for correct function and protection.

MAINTENANCE

Do not store heavy weights or other items on top of your device. Avoid leaving the device near direct or indirect sources of heat.
To disinfect: apply denatured alcohol, disinfectant or other appropriate products when cold.
To clean the screen, non-aggressive detergents and water only are recommended. Contact with aggressive detergents and solvents can damage the screen.
After use, the device can be placed in an ordinary polyethylene or paper bag. These bags can also be used for transport.
The device is made of thermoplastic, which changes when exposed to atmospheric agents and sunlight, so it is recommended to replace the device 5 years after the date of first use.

WARNINGS

The fixed frontal headband comes into contact with the wearer’s skin and is made of: PP. Allergic reactions may occur in sensitive individuals. In case of a scratched or damage lens, it is recommended to replace the part as instructed.
Wearing the GIVI S302 device over prescription glasses can transfer impact, thus creating a risk for the wearer. The GIVI S302 device should not be used against high-speed particles at either room or high temperatures.

APPROVAL

This device is made with high-quality materials to guarantee your maximum protection in line with the conditions of use for protection against droplets and spray. It is optical class 1.
The following marking is applied to the top left of the upper revolving headband:

CE G – EN 166 3 S

An incision with the following marking is applied to the top left of the device screen:

G1S

The markings have the following meanings: CE: symbol of European Conformity.
G: initial of the manufacturer.
EN166: reference to harmonised standard.

3: protection against liquids (droplets and spray).
S: high strength.
1: optical class.
Use of the device implies the knowledge and acceptance of the warnings and limitations contained in this information notice. This device complies with the EN 166:2001 harmonised standard of reference

This device is certified in accordance with European regulation EU 2016/425.
The declaration of conformity is available at the following web page: https://www.givi.it/company/UE-compliance.
This device has been certified by: ITALCERT S.r.l. Notified Body no. 0426

PPE Certification Sector

Viale Sarca 336, 20126 Milan, Italy
Date of issue 16/10/2020,

Rev.4
Givi S.p.A. Via Ungaretti 48 – 25020 Flero (BS)